Hopp til innhold

Forwarding or your own address - which one do you want?

Forward your domain and visitors are sent on to another address, and that is the address they see. Want your own address to stay in the address bar? Then you need a DNS record from the provider that hosts your site. Here is how to do each, and both at once.

Publisert 27. september 2026

Les denne på norsk

The short answer

Forwarding sends visitors on to another address, and the address bar then shows that other address. If you want yourcompany.no to stay visible, you do not forward: you add the DNS record you get from the provider that hosts your site, under DNS in Sedes.

How to choose: if the other address is where you want people to end up, and you do not mind them seeing it, forward. If the site should look like it lives at your own domain, use the DNS record.

Already forwarded your domain, and now the address bar shows something like yourshop.myshopify.com? Nothing has gone wrong. That is what forwarding does. To get your own address back, remove the forwarding and add the DNS record instead: "How do I keep my domain in the address bar?" walks you through both.

Which one do you want?

  • You have moved to a new address, and the old domain should send people there: Forwarding
  • A spare domain (a misspelling, an old name, a campaign domain) should lead to your main site: Forwarding
  • Your site lives at a provider such as Shopify or Wix, and should appear as yourcompany.no: A DNS record from that provider
  • Your site lives at a provider on www.yourcompany.no, and people who type the domain without www should land there too: Both - see "Both at once"

Forwarding handles web visits only. It does nothing to your email: email goes where your MX records say, and those keep working on a forwarded domain.

How do I forward my domain to a website?

You do this on your domain's page in the Sedes app, in the Forwarding tab.

  1. Open the Forwarding tab and click New forwarding. A new row appears.
  2. In From, write the part before the domain: www for www.yourcompany.no, or @ for the domain itself. Only that part, never the whole domain name. The field's placeholder says the same: "@ or www".
  3. In To, write the full address visitors should be sent to, for example https://newcompany.no. It can be a specific page, such as https://newcompany.no/about.
  4. Choose the Type: Permanent (301) or Temporary (302). More on the difference below.
  5. Decide on Keep path and Keep query. Also below.
  6. If the row you just added is for @, a button appears below it: Also forward www.yourcompany.no, with the hint "Many people type www in front. Without its own rule, www can show them an error." Click it unless something else already answers on www. It adds a www row with the same target and settings. The button is only there while the new @ row is unsaved. Once it is saved, you add a www rule with New forwarding, like any other rule.
  7. Click the Save button (it shows how many changes you are saving). A Review changes dialog shows what is about to happen. Confirm with the Apply button, or click Cancel to go back.
  8. You see Forwarding saved., followed by a line saying when the change takes effect.

301 vs 302

  • Permanent (301) says the move is for good. Use it when the old address is not coming back.
  • Temporary (302) says it is for now. Use it for a campaign, a period of maintenance, anything you expect to undo.

These are the only two kinds.

Keep path and Keep query

Both are set per forwarding rule.

  • Keep path carries whatever came after the domain over to the target. With it on, someone visiting yourcompany.no/about lands on newcompany.no/about instead of the front page.
  • Keep query carries the part after the ? over as well, such as tracking parameters from a campaign link. If the target has its own ?…, the visitor's is added after it. With it off, only the target's own query survives.

With both on and the target https://newcompany.no, a visit to yourcompany.no/about?x=1 ends up at https://newcompany.no/about?x=1.

If the target points at one specific page and you want everyone to land on exactly that page, turn Keep path off.

The limits

  • At most 20 forwarding rules per domain.
  • One rule per source host: www can be forwarded once, not to two places.
  • Exact names only. There is no wildcard, so * does not forward every subdomain in one go.
  • The target must be a full address. Start it with https://; http:// is accepted too, even though the error message only mentions https://.
  • The target cannot be a name you are forwarding in the same domain, because visitors would go round in a loop.
  • Domains with æ, ø and å work.

Messages you may see when you save

Each of these appears next to the row it concerns.

  • "Write only the part before the domain, for example www. Use @ for the domain itself." You wrote the whole domain name in From. Keep only the part before it.
  • "This host already has a forwarding rule" That name is already forwarded. Change the existing row instead of adding a new one.
  • "Enter a full address starting with https://" The To field does not hold a complete address. Write it out in full, with https:// at the start.
  • "The target is itself forwarded here, so visitors would go round in a loop" The target is a name you are also forwarding in this domain. Point it somewhere that is not forwarded.
  • "A domain can have up to 20 forwarding rules." You have reached the limit. Remove a rule you no longer need.

If a message does not fit what you typed, write to hei@sedes.no with the domain name and the message you see.

How do I keep my domain in the address bar?

Do not forward. Point the name at the provider that hosts your site, with a DNS record. The site is then served under your own name, and yourcompany.no stays in the address bar.

If the name is already forwarded, remove the forwarding first. A forwarded name cannot also have its own address record, so the DNS record will not save until the forwarding is gone.

  1. In the Forwarding tab, click the small × at the end of the row. The row is marked for deletion. Changed your mind? The same spot now has an Undo delete button.
  2. Click the Save button, check the Review changes dialog, and confirm with Apply. Nothing is removed until you do.

Then add the DNS record:

  1. Get the values from your provider. Your provider's own page for connecting a domain gives you the records to add. Use exactly those. Do not copy values from a guide, including this one.
  2. Add them under DNS in Sedes. The simple view in the DNS editor has the record types you need: A, AAAA, CNAME and ANAME. Save shows you a preview of the change before you confirm it.
  3. Know which record goes where:
    • www often gets a CNAME, pointing at a name the provider gives you, as with Wix and Shopify.
    • The domain itself (@) gets an A record (an IP address) when the provider gives you one.
    • If the provider only gives you a name, not an address, use ANAME on @.
    • Never put a CNAME on @. The DNS standard forbids it, and our form will not stop you, so this one is on you.

Example: Shopify

We have a separate guide for this, step by step: Koble domenet ditt til Shopify. It is in Norwegian only for now.

Example: Wix

Wix calls this the pointing method. It asks for an A record on @ and a CNAME on www, and says you must add both. Take the values from your own domains page at Wix, which is where Wix itself tells you to get them.

A warning about WordPress.com

WordPress.com offers two ways in: changing your nameservers, or updating your DNS records. If you want to keep using forwarding and the DNS editor in Sedes, pick the DNS records route. Changing nameservers moves the domain off Sedes' nameservers, and forwarding and our DNS editor go with it. Take the record values from WordPress.com.

Both at once: site on www, domain forwarded to www

This is the setup many people actually want, and it is supported. The site lives at your provider on www.yourcompany.no, and anyone who types just yourcompany.no is sent there.

  1. Under DNS, add the CNAME your provider gives you on www.
  2. Under Forwarding, add a rule with From @ and To https://www.yourcompany.no.
  3. Do not click the Also forward www.yourcompany.no button. Here www is served by your provider, not forwarded.

Your provider will also give you a record for @, as Wix does. Skip it in this setup: the forwarding takes @. If @ already has an A record from an earlier setup, delete it first, or the forwarding will not save (next section).

Visitors who type yourcompany.no then see www.yourcompany.no, which is still your own address.

What Sedes will not let you combine

A name you forward cannot also have its own A, AAAA, CNAME or ANAME record. We stop it from both sides: when you save a forwarding rule, and when you save DNS records. The message you get is:

Host '…' is forwarded, so it cannot also have its own … record. Remove the forwarding rule or the record.

Which one to remove depends on what you want. Keeping the forwarding: remove the record under DNS. Keeping your own address: remove the forwarding rule, as described under "How do I keep my domain in the address bar?".

What you keep: MX and TXT are still allowed on a forwarded name, so your email keeps arriving and verification records keep working.

In the DNS tab, a name you forward shows up with the label Managed by forwarding. That row is there because of the forwarding. Change it in the Forwarding tab, not in DNS.

How long does it take?

A change usually takes effect within five minutes.

When it does not work

The Forwarding tab is read-only. There is usually one of two reasons, and the tab tells you which.

  • "You can see the forwarding, but only the domain's managers can change it." You are a member of the domain, not one of its managers. Ask one of them to make the change.
  • "Forwarding only works when the domain is active and uses our nameservers. You can change nameservers under Nameservers." Forwarding needs both. Check the Nameservers tab on the domain.

If the tab shows another message, or neither fits, write to hei@sedes.no with the domain name. We don't promise a human within the hour, but we will do our utmost.

Saving says the name "cannot also have its own … record". There is an old A, AAAA, CNAME or ANAME on the name you are forwarding. Remove it under DNS first, then save the forwarding again. If you are not sure the old record is safe to remove, write to hei@sedes.no before you delete anything.

www shows an error after you forwarded the domain itself. Forwarding @ does not cover www. Add a separate rule: click New forwarding, write www in From and the same target in To, then Save and Apply. If www still fails after that, write to hei@sedes.no.

The https address does not work right after saving. The certificate for your name is issued on the first https visit, not in advance. Try again in a moment. Still stuck: write to hei@sedes.no with the domain name and the address you tried.

Why is there no masked forwarding?

Masked forwarding means showing another site inside your own address, so yourcompany.no stays in the address bar while the content comes from somewhere else. We left it out deliberately.

Part of the reason is practical: a site can tell the browser not to show it inside another site, with a header such as X-Frame-Options, and some sites do. Not every site does it, and you can't know in advance whether the one you point at will.

If what you want is your own address in the address bar, the DNS record above is the real version of the same thing. The site is served under your name, rather than dressed up to look like it.

How this actually works

Both options are a DNS record. What differs is where it points.

Forwarding: the name you forward is pointed at Sedes' redirect service. In the DNS tab you see it as Managed by forwarding. When a browser asks for your address, the service answers with "go there instead" (code 301 or 302), and the browser goes. That is why the address bar changes: the browser really has gone somewhere else. We answer both http and https, and http is not upgraded to https along the way.

Your own address: the name is pointed straight at your provider, and the provider serves the site under your name. The browser never goes anywhere else, so the address bar never changes.

Fikk du svar på det du lurte på?